Welcome!
Please feel free to modify this wiki by adding useful information.
Click "edit" and Log in using your NYU Net ID.
If you're new to wiki editing, check out the Basic editing help link in the side-bar on the left.
Note: The MIDI Lab is canceled. It will not be required. But here are the links:
syllabus:
http://www.tigoe.net/pcomp/midi.shtml
Lab:
http://itp.nyu.edu/physcomp/Labs/MIDIOutput
Some notes from Tom about resources for the XBee
XBees: Maxstream.net
XBee Breakout boards: sparkfun or droids.it or newmicro.com
Xbee shields: Libelium.com
Rob Faludi is the go-to person on Xbees. Searching his blog.faludi.com for xbee is a good way to find a lot, fast.
Resident researchers for pcomp:
Jeff's office hours Wednesday 1:30-3:00.
You can sign up for a slot here: https://itp.nyu.edu/inwiki/Signup/Jeff
Jenny is holding Office Hours Thursday 1:30-3:30
&
Friday 2-4 .
Her sign up is here: https://itp.nyu.edu/inwiki/Signup/Jenny
You can find all the Residents sign up times here: https://itp.nyu.edu/inwiki/Signup/Signup
GROUPS FOR FINAL PROJECT:
- Anaid Gomez Ortigoza and David Steele Overholt (from Tom's class)
- SeungJun Lee and HyeJung Chung
- Stella Kim and Andrea Dulko(from Han's class)
- Kim
- Joora
- Theresa, scott jason
- jain
- karen, steve
- natacha, joe
- lori, sofia
- john
- cynthia, armanda
- tim
- DREW||
- Dan
Tom's Note About Serial
In case you're curious:
To calculate the value for a current limiting resistor for an LED: R = (Vs - Vf) / If
Where:
Vs = your source Voltage (usually 5 Volts for pcomp class).
Vf = the typical LED forward Voltage, find that in the LED's data sheet.
If = the typical LED forward Current, find that in the LED's data sheet.
