Reports.R217-TR-GPM History

Hide minor edits - Show changes to output

Added lines 1-40:
'''GPS Sensor'''\\
''R217-TR-GPM'' [[http://itp.nyu.edu/~ttw225/sensors/R217-TR-GPM.pdf | Datasheet]]\\

\\

\\
R217-TR-GPM\\

This Global Positioning Systems receives ata receivd by the DS-GPM and is updated once per second. It logs latitude, longitude, altitude, time, heading, speed and satellites detected. It is targeted at OOPic/Basic Stamp control applications and boasts a low power consumption.\\
\\
The header connections are:\\
1. Serial Output\\
2. Serial Input\\
3. Ground (AN0-3 GD)\\
4. Serial Output\\
5. Serial Input\\
6. AN0-3 V+ Connection\\
\\
Sample of Min/Max:\\

\\
Supply Voltage (+5V)(Vcc): Min. = 4.5, Max. = 5.5 V Absolute Max: Min.= - .05, Max. = +6 V\\
Supply Voltage (6-16V)(V): Min. = 6, Max. = 16 V Absolute Max: Min.= - .05, Max. = +20 V\\
Supply Current : Min. = 50, Max. = 60 mA\\
IO line output Voltage : Min. = 0.3, Max. = Vcc-0.8V V\\
IO line output current : Min. = -, Max. = 20 mA\\
IO line input voltage : Min. = 0, Max. Vcc+0.3V V\\
\\
Notes:\\
Vcc is supply rail from OOPic or any other +5V supply
The DS-GPM may take the power
necessary for operation (approx.
60mA) from an OOPic-R +5V supply,
using a DS-ORI2CCAB, or
from an external battery or power
adaptor supplying between 6 and
16V DC, which is recommended if
the OOPic or OOPic II is connected.\\
\\
I don't quite understand the communication process which is in great detail on the datasheet. See link above.