POINTLESS TEST?
NEW TEST
I decided to run a little test today, as simple and stupid of a test, i think i might have found something out.
So i filled a container with water to see if varying the depth of the water would make a difference in the readings, while the tsunameter wasn't moving.
The readings were not-averaged and the noise was partially under control.
This is at the 4.5 inch reading.
the movements happens when i poured water in the container.
The result of the test was that the value of Z which is what i am focusing on right now, didnt change. It fluctuated a bit, but i am guessing at this point that values around 526-527 are my 0 on the Z axis.
My cat enjoyed the test...
