Assignment 2: datalogging

by Nont

I use Flexiforce as a sensor for testing in this datalogging project.

And then, I just send raw data from FlexiForce to processing via serial to check the character of the data of this sensor.

Picture 1:

Picture A: When I let the sensor stretch as original form, graph was very smooth (A).

Picture B: When I bent the sensor to the position that suitable for pressing, the data had some noise(B).

Picture C: When I started pressing it, the data was dramatically changed (C).

Picture 2: Form this testing, I found that it was very dificult to estimate giving the same value of force to the sensor again.
And character of graph was very unstable.

'+++This is a code for pic+++ '

' Define ADCIN parameters DEFINE ADC_BITS 10 ' Set number of bits in result
DEFINE ADC_CLOCK 3 ' Set clock source (3=rc)
DEFINE ADC_SAMPLEUS 20 ' Set sampling time in uS
SensorValue var word
' serial pins and data reate:
tx var portc.6
rx var portc.7
n9600 con 16468
' Set PORTA to all input
TRISA = %11111111 \\ ' Set up ADCON1
ADCON1 = %10000010
' read sensor on pin RA0:
ADCin 0, sensorValue
serout2 tx, n9600, [sensorValue]
pause 100
Goto main

++This is a code for processing++

Datalogger modify form Tom Igoe Datalogger Code

import processing.serial.*;

Serial myPort; // The serial port

// initial variables: int i = 1; // counter int inByte = -1; // data from serial port

void setup () {
size(350, 280); // window size

  // List all the available serial ports

  //I use COM4 so I open Serial.List()[1] 
  myPort = new Serial(this, Serial.list()[1], 9600);

  // set inital background:

} void draw () {

  if (myPort.available() > 0) {
    inByte =;


void serialEvent () {

  // draw the line:
  line(i, height, i, (height - inByte)-20);                                                                                 
  // at the edge of the screen, go back to the beginning:
  if (i >= width) {
    i = 0;
  else {