NYU | TISCH

INTERACTIVE

ITP (Grad) IMA (Undergrad) LowRes Camp

Skip to content

ITP Physical Computing

Syllabus Pages
Lessons
Videos
Labs
Resources
Pcomp @ ITP

LabElectronicsNoArduino_bb

Breadboard drawing of a DC power jack and a voltage regulator on a breadboard. At the top of the drawing, there is a DC power jack. Red and black wires from the jack connect to a 7805 5-volt voltage regulator mounted in the top right three rows of the breadboard with its tab facing to the right. input. The power supply's red wire is connected to the regulator's top pin row, the input pin. The power supply's black wire is connected to the regulator's middle pin, or ground. Another black wire connects the regulator's middle pin, ground, to the inner left side row of the board. This is the ground bus on the left side. A red wire connects the regulator's bottom pin, the output pin, to the outer left side row of the board. This is the voltage bus on the left side. At the bottom of the breadboard, a red wire connects the left side voltage bus to the inner row on the right side. This is the right side voltage bus. Similarly, a black wire connects the left side ground bus to the outer row on the right side. This is the right side ground bus.

DC voltage jack and 7805 voltage regulator on a breadboard. The regulator is supplying 5V and ground holes are supplying voltage to the rest of breadboard.

Posted on August 28, 2014August 10, 2018 Full size 298 × 577

Post navigation

Published inLab: Electronics

Search for:

Find Content by Category:

Find Content by Category:

Syllabus Pages
Lessons
Videos
Labs
Resources
Pcomp @ ITP

ITP Physical Computing Proudly powered by WordPress